{"id":20867,"date":"2022-11-30T20:54:40","date_gmt":"2022-11-30T18:54:40","guid":{"rendered":"https:\/\/www.basilioparedes.com\/?page_id=20867"},"modified":"2025-01-20T21:23:13","modified_gmt":"2025-01-20T19:23:13","slug":"building-evaluation-report","status":"publish","type":"page","link":"https:\/\/www.basilioparedes.com\/en\/urbanismo\/informe-evaluacion-edificio\/","title":{"rendered":"Building Assessment Report"},"content":{"rendered":"
\n
\n
\"\"<\/figure>\n<\/div><\/div>\n\n\n\n
\n

The IEE or Building Evaluation Report<\/strong> is a report that includes the technical inspection of the building, ITE<\/strong>. Plus energy efficiency and accessibility certificates. <\/p>\n\n\n\n

It is an inspection that collective housing buildings over 50 years old must pass.<\/p>\n\n\n\n

<\/p>\n\n\n\n

<\/p>\n<\/div>\n<\/div>\n\n\n\n

<\/div>\n\n\n\n

What is the difference between IEE and ITE?<\/strong><\/h2>\n\n\n\n
<\/div>\n\n\n\n

Until 2013, with the entry into force of Law 8\/2013 on Urban Rehabilitation, Regeneration and Renewal, the ITE or Technical Inspection of Buildings<\/strong> it was modified for collective housing. From then on, the review of the conditions of accessibility and energy efficiency was added to the technical inspection through complementary certificates. For this reason, the procedure became IEE or Building Evaluation Report<\/strong>. Including the accessibility certificate, the energy efficiency certificate and the technical inspection of the building (ITE).<\/p>\n\n\n\n

<\/div>\n\n\n\n

What is the IEE for?<\/strong><\/h2>\n\n\n\n
<\/div>\n\n\n\n

The purpose of this report is check the safety, stability and reinforcement conditions of the building.<\/strong> Along with accessibility and energy efficiency. In other words, it is about ensuring that the building in question meets the safety, health, accessibility and decoration requirements established by law. <\/p>\n\n\n\n

To carry out the technical inspection of the building, a visual inspection of various elements must be carried out<\/strong>, for example: structure and foundations of buildings waterproofing (roofs, eaves and flat roofs) facades partitions, etc. . walls (plinths, projections...) walls floors plumbing and electricity. Despite the fact that the technical inspection of the building is done visually, the expert must propose all the tests he deems necessary for the elements in question, when defects are discovered.<\/p>\n\n\n\n

<\/p>\n\n\n\n

<\/div>\n\n\n\n

\u00bfWhen is it necessary to pass the Building evaluation report<\/strong>?<\/h2>\n\n\n\n
<\/div>\n\n\n\n

It must be taken into account that the objective of the IEE is the acquisition of a Certificate of Aptitude, which is granted by the Autonomous Community.<\/p>\n\n\n\n

Depending on the result of the ITE, the Certificate of Aptitude will be valid between 0 and 10 years, depending on the type of deficiencies it will be:<\/p>\n\n\n\n